GEOSS logo

Geohazard Supersites and Natural Laboratories

GEO - Group on Earth Observations

BETA
Found 24 collections with more than one hundred thousand products (0.131 sec)
The ASAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments and may be from one of seven possible image swaths. The Level 0 product is produced systematically for all data acquired within this mode. This product provides a continuation of the ERS-SAR_RAW product.
with 40186 products
October 2002 to April 2012 (9 years 5 months 20 days)
The SAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments. The Level 0 product is produced systematically for all data acquired within this mode.
with 23120 products
May 1995 to July 2011 (16 years 2 months 2 days)
The ASAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments and may be from one of seven possible image swaths. The Level 0 product is produced systematically for all data acquired within this mode. This product provides a continuation of the ERS-SAR_RAW product.Products in this series are not meant for download, but can be used through the ESA processing services.
with 21621 products
May 2002 to April 2012 (9 years 10 months 21 days)
The SAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments. The Level 0 product is produced systematically for all data acquired within this mode.
with 19967 products
May 1995 to February 2012 (16 years 8 months 23 days)
The SAR Annotated Raw Data product consists of the SAR telemetry data corresponding to 16 seconds of data collection; it also contains all required auxiliary data necessary for data processing. It is primarily used for testing the ERS-1 SAR processors independently from the HDDR system and for users interested in full SAR data processing.
with 17751 products
June 1995 to May 2011 (15 years 11 months 16 days)
The SAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments. The Level 0 product is produced systematically for all data acquired within this mode.
with 7839 products
August 1991 to February 2012 (20 years 6 months 3 days)
The SAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments. The Level 0 product is produced systematically for all data acquired within this mode.
with 7076 products
July 1991 to March 2000 (8 years 7 months 8 days)
The SAR Annotated Raw Data product consists of the SAR telemetry data corresponding to 16 seconds of data collection; it also contains all required auxiliary data necessary for data processing. It is primarily used for testing the ERS-1 SAR processors independently from the HDDR system and for users interested in full SAR data processing.
with 6661 products
August 1991 to November 2013 (22 years 3 months 1 day)
with 3153 products
The ASAR Image Mode Single Look Complex Image represents a single-look, complex, slant-range, digital image generated from Level 0 ASAR data collected when the instrument is in image mode. Seven possible swaths in HH or VV polarisation are available. The product is primarily intended for use in SAR quality assessment and calibration, and can be used to derive higher level products. The spatial coverage is about 100 km along track and 100 km across track, and the radiometric resolution is 1 look in azimuth, 1 look in range. The file size is 741 Mbytes. It is worth highlighting that Azimuth pixel spacing depends on Earth-Satellite relative velocity and actual PRF and slant range pixel spacing is given by ASAR sampling frequency (19.208 Mhz).
with 1666 products
October 2002 to February 2022 (19 years 4 months 5 days)
This product presents SAR data following preprocessing, but retains every sample as complex data. The product is single-look (i.e. no speckle reduction by multi-look processing) and in slant range. Phase continuity is preserved within the image. Three areas of application are testing of SAR processing algorithms, development of techniques using phase preservation, e.g. SAR interferometry, and application of SAR post-processing algorithms, e.g. geocoding from complex, slant-range data.
with 767 products
May 1992 to April 2011 (18 years 11 months 4 days)
The WS Mode Level 0 product consists of time-ordered AISPs collected while the instrument is in WS Mode. The echo samples in the AISPs have been compressed to 4 bits/sample using FBAQ. This is a high-rate, wide swath (ScanSAR) mode so data is only acquired for partial orbit segments and is composed of data from five image swaths (SS1 to SS5). The Level 0 product is produced systematically for all data acquired within this mode.
with 528 products
February 2004 to September 2010 (6 years 6 months 22 days)
COSMO-SkyMed collection for Geohazards Supersites
with 489 products
October 2009 to September 2015 (5 years 10 months 11 days)
This is a multi-look, ground range, digital image generated from Level 0 data collected when the instrument is in Image Mode (7 possible swaths HH or VV polarisation). The product includes slant range to ground range correction. It is for users wishing to perform applications-oriented analysis and applies to multi-temporal imaging and to derive backscattering coefficients. The stand-alone image is generated using the Range/Doppler algorithm. The processing uses up to date (at time of processing) auxiliary parameters corrected for antenna elevation gain, and range spreading loss. Engineering corrections and relative calibration are applied to compensate for well-understood sources of system variability. Absolute calibration parameters, when available (depending on external calibration activities) are provided in the product annotations. This product provides a continuation of the ERS-SAR_PRI product.
with 318 products
January 2005 to October 2011 (6 years 8 months 12 days)
This product presents SAR data following preprocessing, but retains every sample as complex data. The product is single-look (i.e. no speckle reduction by multi-look processing) and in slant range. Phase continuity is preserved within the image. Three areas of application are testing of SAR processing algorithms, development of techniques using phase preservation, e.g. SAR interferometry, and application of SAR post-processing algorithms, e.g. geocoding from complex, slant-range data.
with 237 products
May 1992 to March 2000 (7 years 9 months 30 days)
The access to the ALOS-2 Data Collection is restricted to specific working groups with rights approved by JAXA.
with 156 products
February 2015 to August 2016 (1 year 6 months 14 days)
with 65 products
May 2003 to March 2011 (7 years 10 months 19 days)
The Precision Image is a multi-look (speckle-reduced), ground range image. The product is calibrated and corrected for the SAR antenna pattern and range-spreading loss: radar backscatter can be derived from the product for geophysical modelling, but no correction is applied for terrain-induced radiometric effects. The image is not geocoded, and terrain distortion (foreshortening and layover) has not been removed. Numbering sequence is relative to the satellite position, and so a different position for the Ascending and Descending scenes. These are 3-looks Precision Images, suitable for calibration purposes.
with 40 products
July 1995 to January 2010 (14 years 6 months 17 days)
with 36 products
February 2007 to April 2011 (4 years 1 mon 21 days)
The SSC product is a single look product of the focused radar signal. The pixels are spaced equidistant in azimuth (according to the pulse repetition interval PRI=1/PRF) and in slant range (according to the range sampling frequency). The data are represented as complex numbers containing amplitude and phase information. Each image pixel is processed to zero Doppler coordinates in range direction, i.e. perpendicular to the flight track. Due to the nature of azimuth/slantrange coordinates, no geocoding is available. The SSC is delivered in the DLR-defined binary COSAR format (see TerraSAR-X Level1B Product Format Specification). The product is compatible with the standard slant range products (SLC) available from ERS-1/2, ENVISAT ASAR, RADARSAT-1 and X-SAR/SIR-C. The SSC product is intended for applications that require the full bandwidth and phase information, e.g. for SAR interferometry and polarimetry. Depending on the required application, this product may be preferred to geocoded data, since it does not include any radiometric artefacts which may be introduced during spatial resampling and geocoding.
with 17 products
September 2008 to June 2011 (2 years 8 months 28 days)
To date, the only operational Level-1B data product offered by ESA from the ASAR Wide-Swath Mode (WSM) has been the multi-look detected product (ASA_WSM_1P), intended to support applications that exploit intensity data. In order to support the development of new applications with the ASAR ScanSAR data, a new WSM product providing phase information has been developed and implemented in the ESA ASAR processor, the Wide-Swath Single-Look complex product (ASA_WSS_1P). It is expected that this new product will be mainly used for INSAR applications based either on wide-swath/wide-swath pairs or wide-swath/image mode pairs, applications of ocean current mapping, large-area ocean wave retrievals, and atmospheric water vapour characterisation. It shall be mentioned that the standard ESA WSS product is based on the prototype WSS processor developed by Polimi/Poliba, which has also been used to generate prototype products for testing the potential and preparing the exploitation of the new WSS product (see the first ASAR WSM-WSM interferogram). The new ESA ASA_WSS_1P product is now available as standard ENVISAT ASAR product and it can be ordered using EOLI-SA. Please contact the Earth Observation Help Desk Team for further details. The ASA_WSS_1P product format is slightly different from other ASAR products since: there are 5 different MDSs, one per sub-swath a "Doppler Grid" ADS has been included to support ocean current mapping applications there are 5 records in the MPP ADS, one per sub-swath there are 5 records in the SQ ADS, one per sub-swath Other key characteristics of the ASA_WSS_1P product are summarised below: processing is fully phase preserving data in the MDSs is sampled in a common grid both in range and in azimuth standard product is 60 sec long with 80 m az. pixel spacing auxiliary timeline information has been added in the Main Processing Parameters ADS elevation antenna pattern correction is applied by default (although the product is a single-look complex)
with 10 products
September 2009 to January 2010 (4 months 21 days)
The Precision Image is a multi-look (speckle-reduced), ground range image. The product is calibrated and corrected for the SAR antenna pattern and range-spreading loss: radar backscatter can be derived from the product for geophysical modelling, but no correction is applied for terrain-induced radiometric effects. The image is not geocoded, and terrain distortion (foreshortening and layover) has not been removed. Numbering sequence is relative to the satellite position, and so a different position for the Ascending and Descending scenes. These are 3-looks Precision Images, suitable for calibration purposes.
with 10 products
November 1992 to May 1996 (3 years 6 months 6 days)
The SAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments. The Level 0 product is produced systematically for all data acquired within this mode.
with 0 products
The SAR Image Mode source packets Level 0 data product offers Level 0 data for possible images processing on an other processing site. It includes some mandatory information for SAR processing. The Image Mode Level 0 product consists of time-ordered Annotated Instrument Source Packets (AISPs) collected while the instrument is in Image Mode. The echo samples contained in the AISPs are compressed to 4 bits/sample using Flexible Block Adaptive Quantisation (FBAQ). This is a high-rate, narrow swath mode so data is only acquired for partial orbit segments. The Level 0 product is produced systematically for all data acquired within this mode.
with 0 products
rdf atom kml gmaps
2017-08-21T02:26:14Z Terradue CAS version 1.4.0 0.131 sec